Press the Pushers: What a $1,299 Rolex Daytona Super Clone Actually Does

Two stainless steel watches under inspection light on black surface with tools nearby

Rolex built the Daytona as a stopwatch for racing drivers. Two copies of it, one at $499 and one at $1,299, look much alike across a room. Press the top pusher and only one of them starts to count.

Most watches only tell the time. Rolex’s Cosmograph Daytona was built to measure it. It is a stopwatch in a 40 mm case, with two pushers beside the crown and a speed scale on the bezel. One US dealer, The Watch Guys, calls it “one of the most counterfeited watches in the world”. That raises a fair question for anyone tempted by a  Rolex Daytona super clone. Do the pushers on a copy actually time anything?

One online shop,  SwissClone, makes that easy to check, because it sells the Daytona at two fixed prices in US dollars. Its $499 replica runs a Japanese Miyota 8215 automatic. Its $1,299 super clone has a cloned Rolex chronograph calibre, listed as 4131-family. In October 2026 the shop filmed one of each side by side and published its notes. What follows about the two watches comes from the shop’s published notes and its listings.

A Stopwatch Built for Drivers

Rolex launched the Cosmograph in 1963, and it soon took the name Daytona. Rolex says it was designed for endurance racing drivers. Its bezel carries a tachymetric scale for working out average speed. Cover a kilometre in 22.5 seconds and the hand stops at 160, for 160 km/h.

That name points to Florida. Rolex counts 14 land speed records set on Daytona Beach between 1904 and 1935. Five of them belonged to the British driver Sir Malcolm Campbell. Paul Newman, actor and racing driver, won his class at the 24 Hours of Daytona in 1995. His own Daytona sold at Phillips in New York in October 2017 for $17.75 million.

Rolex gave the watch its own chronograph calibre, the 4130, in 2000. Its successor, the 4131, followed in 2023 and runs the current 126519LN.

Two Watches, Two Generations

Both copies wear rubber straps, but they follow different generations. At $499, the replica copies the 116519LN, the previous one. At $1,299, the super clone copies the 126519LN, which Rolex sells today. From arm’s length they match: 40 mm cases, tachymeter bezels and three small dials each.

Look closer and the dials part ways in three places. Hour markers on the replica hold a rectangle of lume in a thick frame, while the super clone’s are slim and pointed. Small dials on the replica are grooved and ringed, and on the super clone they are flat. Only the super clone carries a tiny printed crown under its six o’clock marker. In the shop’s own notes, all three date the reference rather than the tier.

Metal is another matter. Rolex makes the 126519LN in 18 ct white gold, listed at 37,450 pounds on its UK site in November 2026. Both copies are steel instead: 316L on the replica and, by the factory’s claim, 904L on the super clone, with no lab test behind it.

Close-up of two luxury wristwatches with black dials and stainless steel bezels

Dial side of both watches, filmed in October 2026 and shown on their side. Left, the $499 replica 116519LN, previous generation, with framed hour markers and grooved small dials. Right, the $1,299 super clone 126519LN, current generation, with slim pointed markers and flat small dials. These details date the reference, not the tier. © 2026 SwissClone. Original photograph, full rights held.

Press the Top Pusher

Rolex’s user guide sets out the routine. Unscrew the pushers, then press the upper one to start and stop, and the lower one to reset. Seconds run on the long centre hand. Minutes and hours count on the small dials at three and nine.

On the $499 replica, nothing happens. Its Miyota carries no chronograph mechanism, and its listing calls the pushers and small dials cosmetic. Its long centre hand is just the running seconds, moving all day.

On the $1,299 super clone, that long hand stays still until called. One press of the upper pusher sets it running. A second press halts it, and the lower pusher sends it back to zero. Its run in the shop’s footage lasted about ten seconds, not long enough to move the minute counter. Its listing says the counters work and reset to zero.

At 21,600 beats an hour, the Miyota’s hand steps six times a second. At 28,800, the clone’s chronograph hand steps eight. Rolex publishes about 72 hours of reserve for its own 4131. Listings give the clone 54 hours from a full wind, and the replica 42.

Silver chronograph watch with black bezel on wooden surface close-up

Current-generation super clone 126519LN, standing on the shop’s bench, the folding clasp of its rubber strap behind the head. Its upper pusher starts and stops the chronograph, and the lower one resets it. © 2026 SwissClone. Original photograph, full rights held.

A Crown in the Glass

Since the early 2000s Rolex has laser-etched a tiny crown into the crystal of most models, at six o’clock. Bob’s Watches, a US dealer, says it is nearly invisible to the naked eye and needs a loupe and angled light. On the shop’s replica the etch is plain to see, even in an ordinary photo. On its super clone nothing shows in normal light. Only a UV torch, held at an angle, picked it out on the bench.

One trap: on the super clone, a small dark crown under the six o’clock marker is dial print, not the etch.

Watch dials with "Swiss Made" marking in close-up detail side by side comparison

Six o’clock on both crystals, stills from the shop’s footage. Left, the replica 116519LN, previous generation: its etched crown sits over the minute track, easy to spot. Right, the super clone 126519LN, current generation: no etch shows in normal light, and the dark crown under the marker is printed. © 2026 SwissClone. Original photograph, full rights held.

Why the Copy Goes to the Gig

Thieves know the model too. Reporting The Watch Register’s 2022 figures, IDEX Online listed Daytona, GMT and Oyster Perpetual models as the Rolexes stolen most. In London, Met figures read in court in October counted 97 watch robberies, including attempts, in Kensington and Chelsea, Westminster, and Hammersmith and Fulham between January and June 2026. A detective sergeant’s statement put the West End’s losses at about 1 million pounds a month. Covering a Met operation in Soho, The National reported that robbers in 2022 waited for people to leave venues between 11pm and 4am. A copy does not make anyone safer, since anything styled as a Rolex can catch a spotter’s eye. It only shrinks the loss: leave the real one at home, and a bad night at a show costs the copy’s $1,299, not a watch Rolex lists at 37,450 pounds.

What the Extra $800 Buys

Neither watch is a Rolex, and the shop does not sell either as one. Most of the extra $800 buys a working stopwatch: a cloned calibre whose pushers start, stop and reset. It also buys an anti-reflective coating on the sapphire and a pressure test of every unit against a 50-metre rating. By contrast, the replica is rated to 30 metres, for splashes only, and neither is for diving. Both tiers go through the same 12-point checklist before dispatch, though the replica gets the pressure test only on request. Each buyer then sees eight photos and a clip of that very watch running, chronograph included where there is one. Nothing ships until the buyer approves. UK orders usually arrive in 9 to 15 business days, with free shipping.

Press the top pusher. On one copy nothing moves. On the other a hand starts counting, and that hand is where most of the extra money goes.

Leave a Reply

Your email address will not be published. Required fields are marked *